Simpson SWF10761 Bedienungsanleitung PDF herunterladen (Seite 19)

You must DISCONNECT the appliance

from the electricity supply, before you can

carry out any cleaning or maintenance

work.

The washing powder and additive

dispenser drawer should be cleaned

regularly.

Remove the drawer by pressing the

catch downwards and by pulling it out.

Flush it out under a tap, to remove any

traces of accumulated powder.

To aid cleaning, the top part of the

additive compartment should be

removed.

Having removed the drawer, use a

small brush to clean the recess,

ensuring that all washing powder

residue is removed from the upper and

lower part of the recess.

The water we use normally contains

lime. It is a good idea to periodically use

a water softening powder in the

machine. Do this separately from any

laundry washing, and according to the

softening powder manufacturer's

instructions. This will help to prevent the

formation of lime deposits.

Leave the door open for a while. This

helps to prevent mould and stagnant

smells forming inside the appliance.

Keeping the door open after a wash will

also help to preserve the door seal.

With the use of low temperature

washes it is possible to get a build up

of residues inside the drum.

We recommend that a maintenance

wash be performed on a regular basis.

Clean the exterior cabinet of the

appliance with soap and water only,

and then dry thoroughly.

care and cleaning 19

Care and cleaning

Descaling

After each wash

Maintenance Wash

To run a maintenance wash:

External cleaning

Cleaning the dispenser drawer

Cleaning the drawer recess

The drum should be empty of laundry.

Select the hottest cotton wash

program.

Use a normal measure of detergent,

must be a powder with biological

properties.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 31 32

Kommentare zu diesen Handbüchern

Keine Kommentare